Hardware Interface

The generated register block will present the entire hardware interface to the user using two struct ports:

• hwif_in

• hwif_out

All field inputs and outputs as well as signals are consolidated into these struct ports. The presence of each depends on the specific contents of the design being exported.

Using structs for the hardware interface has the following benefits:

• Preserves register map component grouping, arrays, and hierarchy.

• Avoids naming collisions and cumbersome signal name flattening.

• Allows for more natural mapping and distribution of register block signals to a design’s hardware components.

• Use of unpacked arrays/structs prevents common assignment mistakes as they are enforced by the compiler.

Structs are organized as follows: hwif_out.<heir_path>.<feature>

For example, a simple design such as:

addrmap my_design {
    reg {
        field {
            sw = rw;
            hw = rw;
            we;
        } my_field;
    } my_reg[2];
};

… results in the following struct members:

hwif_out.my_reg[0].my_field.value
hwif_in.my_reg[0].my_field.next
hwif_in.my_reg[0].my_field.we
hwif_out.my_reg[1].my_field.value
hwif_in.my_reg[1].my_field.next
hwif_in.my_reg[1].my_field.we

For brevity in this documentation, hwif features will be described using shorthand notation that omits the hierarchical path: hwif_out..<feature>